Water-level setting valve

Model: 100D;
Diameter: DN 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700 mm
Medium: water
Pressure: 1.0 / 1.6 MPa
Applicable Temperature: ≤80 °C
Body Materials: Cast iron etc.
Applicable Industry: Urban Construction;Chemical;metallurgy;Oil;Pharmaceutical;Food;Beverage;Environmental protection

ClickWater-level setting valve Parameter listto get detailed parameter form
This form is produced by Adobe Acrobat PDF files
please install it before you read:Adobe Acrobat Reader

Water-level setting valve Characteristic use

        100D Water-Level Setting Valve is used in the automatic water supply system of a water tower or pool. When the liquid level gets to the set height, it transmits a signal to the pump through a related mechanism to have the pump stop supplying. And when the level is below than the set water level, it starts supply automatically so as to prevent of the water hammer effectively due to the pump's stop and to avoid an extra-high pressure in the pipeline. It features by the sensitive control, high accuracy of level control, not disturbed by the level from the water pressure, tight closure without leak, reliable performance and long duration.

Water-level setting valve

Water-level setting valve structure drawing

Water-level setting valve Schematic diagram of a typical installation

Water-level setting valve　Related product

• Flow control valve
• Pump control valve
• Water-level setting valve
• Diaphragm raining valve
• Slow-closing check valve
• Pressure-reducing valve
• Angular water level setting valve
• Emergent-closing valve
• Hydraulic electric control valve
• Differential by-pass balance valve
• Remotel-controlled floating valve
• Solenoid remote control floating valve
• Hydraulic water level control valve
• Pressure discharging & sustaining valve