Contact Us

Pressure discharging & sustaining valve

Model: 500X ;
Diameter: DN20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500 mm
Medium: water
Pressure: 1.0 / 1.6 / 2.5 MPa
Applicable Temperature: ≤80 °C
Body Materials: Cast iron etc.
Applicable Industry: Urban Construction,Chemical,metallurgy,Oil,Pharmaceutical,Food,Beverage,Environmental protection

readerlogo ClickPressure discharging & sustaining valve Parameter listto get detailed parameter form This form is produced by Adobe Acrobat PDF files
please install it before you read:Adobe Acrobat Reader

Pressure discharging & sustaining valve Characteristic use

        500X Pressure Discharge & Sustain Valve is used in the pipeline system to prevent of surpassing pressure or to keep the pressure of it, to reduce the water hammer's shock after the pump is closed and also used as a water hammer remover in the large water supply system. A self cleaning filter screen is placed on the inlet of the valve's control system, which stops the suspension grains of the bigger specific gravity and diameter from going into the system by means of the bigger specific gravity of the fluid to ensure the main valve's water supply pressure at the upstream at the set value, and to get the system circulated smoothly without any resistance. This valve features by sensitive open-close, safety, reliability, stable motion and long duration.

Pressure discharging & sustaining valve
Pressure discharging & sustaining valve
Pressure discharging & sustaining valve
Pressure discharging & sustaining valve structure drawing
Pressure discharging & sustaining valve Schematic diagram of a typical installation
Pressure discharging & sustaining valve Schematic diagram of a typical installation

Note: Either elastic seat ring sealed gate valve or butterfly valve can be selected in the schematic of installation. Recommend to select the butterfly valve in case of =DN350.