product display

Gate Valves || Check Valves
Ball Valves || Butterfly Valves
Plug Valves || Balance valves
Safety valves || Mud Valves
Gauge Valves || Globe Valves
Reducing Valves || Filters

Forged Steel Valves
API Cast Steel Valves
Water power control valves
Motorized Valve Actuators
Multi-functional Water Pump Control Valves

Contact Us

Impulse safety valve

Model: GA49H/F2/A69Y ;
Diameter: 25mm
Medium: Steam
Pressure: ≤4MPa
Applicable Temperature: ≤420°C
Body Materials: Carbon steel etc.
Applicable Industry: Urban Construction,Chemical,metallurgy,Oil,Pharmaceutical,Food,Beverage,Environmental protection

readerlogo ClickImpulse safety valve Parameter listto get detailed parameter form This form is produced by Adobe Acrobat PDF files,please install it before you read:Adobe Acrobat Reader

Impulse safety valve Characteristic use

Usage
This valve is used for power plant boilers, pressure containers, pressure and temperature reducing device and other facilities. It serves to prevent the pressure exceeding the highest allowable pres-sure value and ensure the safety of the device when working.

Structure briefing
1、The pressure of the disc is balanced through the lever and heavy hammer and the valve is ensured seal by moving the for ton of heavy hammer and changing the weight of heavy hammer to reach the required set pressure.
2、The sealed surface is made of Fe base stainless steel by overlaying welding. Through thermal treatment, the wear resistance and anti-erosion of disc is improved.
3、At the top of valve is equipped an electromagnet to open and another to close the valve. The actions of the mechanism and the electric appliance are separate and will not affect each other.

Installation instruction
1、This valve shall be used with main safety valve A49H-40 to-gather.
2、Impulse safety valve shall be installed vertically and the lever shall be kept level. The clearance from the lever to both sides of guide fork shall be even.
3、The pipeline shall be washed clean before installing impulse safety valve.
4、A long distance between the leading pipe of the impulse safety valve and the inlet pipe of the main safety valve shall be kept. And the distance between the electric contact pressure meter and the inlet pipe of the main safety valve shall be no less than 5 times of the diameter of the inlet pipe, for feat that the validity of the mater and the impulse safety valve may be affected by the steam releasing process of the main safety valve.

GA49H-40 Impulse safety valve
GA49H-40 GA49H-40 Impulse safety valve structure drawing
GA49H-40 structure drawing

Impulse safety valve Related product