Contact Us

Angular quick-open mud valve

Diameter:DN 80mm, 100mm, 125mm, 150mm, 200mm, 250mm, 300mm, 350mm, 400mm
Medium: mud sand and dirt
Pressure: 1.0MPa
Applicable Temperature:≤80°C
Body Materials: Cast iron
Applicable Industry: Urban Construction,Chemical,metallurgy,Oil,Pharmaceutical,Food,Beverage,Environmental protection

readerlogo ClickAngular quick-open mud valve Parameter listto get detailed parameter form, This form is produced by Adobe Acrobat PDF files
please install it before you read:Adobe Acrobat Reader

Angular quick-open mud valve Characteristic use

A.  PURPOSE
Angular Quick-Open Mud Valve is mounted outside of the bottom wall of various precipitation pools to remove the mud sand and dirt on the bottom of the pool.
B.  WORKING PRINCIPLE AND PERFORMANCE
This valve consists of a hydraulic cylinder and an angular stop valve by way of combining the internal power of the hydraulic cylinder to drive the disc to go up and down to have the body’s path open or close so as to have the fluids pass or stop.
The sealing part of the piston of the hydraulic cylinder is an L-type leather cup, good tightness and durability. Both disc and seat ring are soft seal, well sealed without leakage. Use a collective control with an electric or manual two-place four-way reversal valve, easy operation.
C.  MAIN TECHNICAL PARAMETERS         
a. PN: 1.0MPa                     b. Working medium with the hydraulic cylinder: pure water, air
c. Working pressure of the hydraulic cylinder: 0.15~1.0MPa    d. Medium temperature:0~80℃

Angular quick-open mud valve
Angular quick-open mud valve
Angular quick-open mud valve GAD plans
Angular quick-open mud valve structure drawing
Angular quick-open mud valve Schematic diagram of a typical installation
Angular quick-open mud valve Schematic diagram of a typical installation