Rising stem resilient gate valve

Model: RRHX
Diameter: DN 50~600 mm
Medium: water, oils, gas etc.
Pressure: 1.0~2.5MPa
Applicable Temperature: 0~120°C
Body Materials: Grey cast iron, ductile cast iron, cast steel
Applicable Industry:fire protection and industry system

ClickRising stem resilient gate valve Parameter listto get detailed parameter form, This form is produced by Adobe Acrobat PDF files
please install it before you read:Adobe Acrobat Reader

Rising stem resilient gate valve Characteristic use

         A.RISING STEM RESILIENT GATE VALVE PRODUCT INTRODUCTION
Rising stem resilient gate valve has general resilient seated gate valve's advantages and at the same time can show the valve's opening directly. It can open or close reliably and quickly so is widely used in fire protection and industry system. Generally, the valve is installed in the high position to the ground.
B.RISING STEM RESILIENT GATE VALVE MAIN TECHNICAL PARAMETERS
1.Nominal pressure: 1.0-2.5MPa Working temp.:0-120°C Flanged end: GB/T17241.6 GB9113
2.Nominal diameter: 50-400mm Service: water, oils, gas etc. Inspection and test: GB 13927 API 598

Rising stem resilient gate valve

Rising stem resilient gate valve structure drawing

Rising stem resilient gate valve structure drawing

Rising stem resilient gate valve structure drawing

Rising stem resilient gate valve Related product

• Bellows gate valve
• Cryogenic gate valves
• Gate valve class 600Lb
• Gate valve class 150Lb
• Gate valve class 300Lb
• Pressure seal gate valve
• Gate valve class 1500Lb
• Gate valve class 900Lb
• Flanged end gate valve
• Extended body gate valve
• Pressure-seal gate valves
• Forged steel bolt gate valve
• Rising stem resilient gate valve
• Forged steel welding gate valve
• Electric resilient seated gate valve
• Flanged end pressure seal gate valve
• Oversized resilient seated gate valve
• Rising stem resilient seated gate valve
• Non rising stem resilient seated gate valve
• Special fire signal resilient seated gate valve