Contact Us

Non rising stem resilient seated gate valve

Model: RVHX,RVCX ;
Diameter: DN 50~600 mm
Medium: water, oils, gas etc.
Pressure:1.0~2.5MPa
Applicable Temperature: 0~120°C
Body Materials: Grey cast iron, ductile cast iron, cast steel etc.
Applicable Industry: ap water industry, sewage treatment, shipping construction, petroleum, chemicals, food, pharmacy, textile, electric power, metallurgy and energy system's pipeline

readerlogo ClickNon rising stem resilient seated gate valve Parameter listto get detailed parameter form This form is produced by Adobe Acrobat PDF files
please install it before you read:Adobe Acrobat Reader

Non rising stem resilient seated gate valve Characteristic use

A.NON RISING STEM RESILIENT SEATED GATE VALVE PRODUCT INTRODUCTION
The valves disc is rubber-packed to get excellent sealing effect by the rubber's resilient deformation. Non-rising resilient seated gate valves solve the problem in general gate valves such as leakage, rusting etc. and saves installation space. It is used widely in tap water industry, sewage treatment, shipping construction, petroleum, chemicals, food, pharmacy, textile, electric power, metallurgy and energy system's pipeline to adjust and shut off fluids.
B.NON RISING STEM RESILIENT SEATED GATE VALVE MAIN TECHNICAL PARAMETERS
1.Nominal pressure: 1.0-2.5MPa Working temp.:0-120°C Flanged end: GB/T17241.6 GB9113
2.Nominal diameter: 50-400mm Service: water, oils, gas etc. Inspection and test: GB 13927 API 598

Non rising stem resilient seated gate valve
Non rising stem resilient seated gate valve
Non rising stem resilient seated gate valve GAD plans
Non rising stem resilient seated gate valve structure drawing
Non rising stem resilient seated gate valve
Non rising stem resilient seated gate valve
Non rising stem resilient seated gate valve GAD plans
Non rising stem resilient seated gate valve structure drawing